Ground fault [RE-wrenches]

[Bill Brooks]

Joel,

The C-40 should only get hot when it is regulating. It should never be
regulating when you are grid connected. Touching the heat sink on a sunny
day is the quickest way to tell whether your set points are correct.

It will get warm even when it is not regulating when 30 amps is going
through it, but it should not be hot.

Bill.

-----Original Message-----
From: Joel Davidson [mailto:joeldavidson at earthlink.net]
Sent: Thursday, November 14, 2002 4:23 PM
To: RE-wrenches at topica.com
Subject: Re: Ground fault [RE-wrenches]


Has anyone measured the temperature of their SolarBoost or the C40 heat
sink? If
we have another sunny day tomorrow, I will measure my C40 and post the
reading.
***snip***

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================