high voltage inverters [RE-wrenches]

[Kent Sheldon]

Lee, I don't know, I quit Xantrex over a year ago. I'd contact Mike
Behnke at the Livermore office. He should know the answer. Regards,

____________________________________________
Kent Sheldon
Manager, Industrial Power Systems
SMA America
ksheldon at sma-america.com
925 513 8813



-----Original Message-----
From: solplex at montana.com [mailto:solplex at montana.com] 
Sent: Friday, November 01, 2002 9:18 AM
To: RE-wrenches at topica.com
Subject: high voltage inverters [RE-wrenches]

Kent Sheldon.   In an earlier post, 3/28/01, you mentioned Trace was
putting in new software for the PV Series inverters, to allow opertion
below 300Vdc. What is the update on that.  What is the current
specification on the PPTV lower limit.  More importantly, what is the
mimimum allowable DC level of the inverter, even at the less efficient
point on your array curve?  Thank you.  Lee Tavenner

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================