Low Head Hydro Workshop in PA during weekend of 18 OCT 02[RE-wrenches]

[Bob Ellison, Alternative Energy Systems]

>From conversations with Ron, he was looking for 10 or so people, I know 4
who are going so this will be a busy place. Ron has forgotten more than I
have ever learned about hydro.... but I plan on curing that on the 3rd
weekend in October......

Just my thoughts,
Bob

RE. Ellison
Supplier of;
Alternative Energy Systems & Supplies
34642 Countryman Road
Theresa, NY. USA
                               13691-2076


-----Original Message-----
From: Bob-O Schultze, Electron Connection
[mailto:econnect at snowcrest.net]
Sent: Wednesday, September 11, 2002 8:45 PM
To: RE-wrenches at topica.com
Subject: Re: Low Head Hydro Workshop in PA during weekend of 18 OCT
02[RE-wrenches]


Group,
I have known Ron MacLeod for a long time. He is a fellow hydromaniac
of the first water. (of course the pun was intended!) Go if you can.
Best, bob-O

>Fellow wrenches,
>
>Want to learn about Ultra Low Head Hydro?
>
>Ron MacLeod has been at it for a very long while and is opening up his shop
>(and head) to fellow wrenches 5 weeks from now.
>
>The following is his announcement of the no cost event and his request to
>RSVP at microhydro at dplus.net
>
>His website is  www.waterturbine.com
>
>Best wishes for a successful workshop.
>
>Bill Loesch, Solar 1 - St. Louis Solar
>
>
>Ultra Low Head Workshop is a happening thing - Scheduled for
>October 18th- Friday - thru Sunday - also folks can hang for a few days
>after to view more sites locally.-
>     scheduled field trips include visits to 5 ultra low head sites from
>2kw Dc to 20 Kw grid intertie  - heads from 3 ft to 8 ft. - Sunday trip
>to one 20 Kw Intertie site on 14 ft head and My test site  7.5 ft of
>head - one steel breast wheel at 1500 watts - one Nautilus at 1800 watts
>and two low head powerpals - 200 watts and 500 watts - operating systems
>charging batteries at 48 volts - w/ 2 5548 trace inverters in parallel .
>
>     These trips are in addition to as many hours of classroom work as
>possible - in my shop with slides - etc. The workshop goal is to give
>dealers and a few individual sit owners a GOOD Sense of Low Head site
>evaluation and design - and a sense of how water works in nature - and
>how to harness it w/out damage to the environment.
>     There will be a stiff load of history mixed in as this is an old
>almost lost technology - My collection of engineering books and turbine
>makers catalogs will be accessible and people will be able to physically
>get their hands on a number if tiny to small low head machines and
>Runners.
>     We can put folks up with a good kitchen and Bath - rudimentary
>sleeping facilities - fridge for the beer. Bring sleeping bags and
>pillows ( I carry my favorite pillow everywhere) .
>     Hey Richard - thanks for sending Joe along - we are going to have
>fun! Never forget that if you want to see the gods smile - just make
>long term plans - and ALWAYS eat your dessert first - If it ain't fun It
>ain't worth doing -
>
>Best Ron MacLeod
>
>Please RSVP ASAP _ Thanks
>
>- - - -
>To send a message: RE-wrenches at topica.com
>
>Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
>List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
>Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
>Hosted by Home Power magazine
>
>Moderator: michael.welch at homepower.com
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================