[RE-wrenches] Exeltech
Ray Walters
remotech at taosnm.com
Thu Jul 18 10:41:40 PDT 2002
Would you recommend trying longer
>cables of #4 with more turns?
>
We usually run #2 on the XP1100 series inverters. We've had great luck with
noise interference, the XP is our " holy hand grenade" for noise problems.
You can actually run as big as 2/0, but I thought the lugs were too close
to each other. Also, use a resettable breaker with the Exeltechs, they're
not as friendly as Trace products when overloaded. Try finding slo-blo 35
amp glass fuses sometime. That's what's inside the XP wired in parallel no
less, and they'll blow before the electronic overload protection starts
working under certain loads.
Also, I agree with everyone that the difference is the internal filtering
on the radio or TV itself. I had a customer with a Nakamichi Hi FI stereo
running on a DR Mod square wave inverter. Absolutely no noise at all. I
think an appliance change may be simpler and cheaper than the various
filters reccomended.
Ray
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
More information about the RE-wrenches
mailing list