PJM-> RE: SW UI phantom load removal [RE-wrenches]
blair Tump may
tump at midcoast.com
Wed Jul 17 18:45:07 PDT 2002
<x-flowed>
I installed a 1100 vt/30 amp timer on my SW grid inverter,(AC1) comes on
(connects to the grid) @8 & off @5 works quite well charging amps set to 1
, output to the grid @ 7 Amps AC.
>Kirk,
>
>Can you set up the grid usage timer to help you with this? I admit I haven't
>actually done it, but have always thought this would be a potential way to
>avoid the all-nite float current into the battery bank.
>
>E. H. Roy
>Solar Works, Inc.
>64 Main Street
>Montpelier, VT 05602
>1-800-339-7804 ext. 306
>ehroy at solar-works.com
>
>-----Original Message-----
>From: Kirk Herander [mailto:kirk at vtsolar.com]
>Sent: Tuesday, July 16, 2002 6:39 PM
>To: RE-wrenches at topica.com
>Subject: SW UI phantom load removal [RE-wrenches]
>
>Hello group,
>
>What's the best way to automatically disconnect grid power from the SW when
>not selling back (i.e. nighttime)? I can think of several contactor / relay
>scenarios. We've discussed this previously, but I can't remember the
>details.
>
>thanks, Kirk
>
>Vermont Solar Engineering
>a Xantrex / Trace Certified Dealer Charter Member
>Kirk Herander
>PO Box 697
>Burlington, VT. 05402
>www.vermontsolar.com
>www.backeastsolar.com
>800.286.1252 - 802.863.1202
>fax 802.863.7908
>
>- - - -
>To send a message: RE-wrenches at topica.com
>
>Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
>List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
>Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
>Hosted by Home Power magazine
>
>Moderator: michael.welch at homepower.com
>
>- - - -
>To send a message: RE-wrenches at topica.com
>
>Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
>List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
>Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
>Hosted by Home Power magazine
>
>Moderator: michael.welch at homepower.com
>
Blair "TUMP" May
blair at solarwindsnorthernlights.com
www.solarwindsnorthernlights.com
Serving Mid Coast Maine & Northern California
610-517-8401 707-498-2804
A Trace Xantrax "Certified" Dealer / Installer
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
</x-flowed>
More information about the RE-wrenches
mailing list