Rooftop wiring [RE-wrenches]

[Matt Lafferty]

David / Wrenches:

We are using the flat TC.  The cable glands supplied with the KC-120 fits
the cable perfectly and allows us to pass the harness, with ring tongues
crimped on, through the panelized assembly then compress the gland nut to
secure the cable.

My note regarding taking your time stripping the jacket is a cautionary one.
A careless or overlooked nick in the conductor insulations could lead to
arcing.

-Matt Lafferty
pvpro at attbi.com

----- Original Message -----
From: "David Palumbo, Independent Power & Light" <ipl at sover.net>
To: <RE-wrenches at topica.com>
Sent: Tuesday, April 16, 2002 8:21 AM
Subject: RE: Rooftop wiring [RE-wrenches]


> Are you using round TC. Try the flat TC one red and one black conductor.

>
Matt Lafferty wrote: <<Regarding Tray Cable....Our use of TC is just kicking
in.  What a great
> way
> to go!  Tough to strip the jacket repeatedly without nicking the conductor
> insulation....Take your time. >>
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================