Winco LP Generator [RE-wrenches]
    blair Tump may 
    tump at midcoast.com
       
    Wed Jan 30 06:24:49 PST 2002
    
    
  
<x-flowed>
>Winco generators in MHO  are NOT the best units out there, if this is 
>something he already has then good luck.... pain to set Hzs w/ full load, 
>then a lite load! If  he is in the market then there are other units that 
>have auto EVR!
>    I have a customer who wants a Winco Propane generator (5000 watt) in his
>off-grid PV & Wind system.  I would appreciate any feedback on experience
>with this generator and possible sources.  It will be hooked up with
>autostart from a SW4024.
>
>John Blittersdorf
>Central Vermont Solar and Wind
>
>- - - -
>To send a message: RE-wrenches at topica.com
>
>Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
>List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
>Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
>Hosted by Home Power magazine
>
>Moderator: michael.welch at homepower.com
>
     Blair "TUMP" May
     blair at solarwindsnorthernlights.com
     www.solarwindsnorthernlights.com
Serving Mid Coast Maine & Northern California
  610-517-8401                      707-498-2804
A Trace Xantrax "Certified" Dealer / Installer
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
</x-flowed>
    
    
More information about the RE-wrenches
mailing list