Outback FX2000 [RE-wrenches]

[Todd Cory, Mt. Shasta Energy Services]

Chris,

I would support availability of a smaller version of the PSDC for use with 1 or 2 FX2000's. Until then, I will be tempted to try to integrate a DC250 for this purpose even though they are on the small side. I believe the current PSDC has
erred on the other extreme of being too large for most of the off grid applications I see and work with.

I am anxious for your FX product line to be available and already have a system planned for next summer that will use 2 FX2000's over 1 SW.

Todd



"Mangelsdorf, Marco" wrote:

> Chris,
>
> You don't say when you expect the FX line to be grid-compatible.  Also, will only the 2024 version be ready soon?  So, just so I get this straight, there are no FX2000 inverters CURRENTLY available from Bob M. or any other distributor?
>
> marco, ProVision Technologies
>
>         A ever increasing number of FX2024s are in the field undergoing "final"
>
>         tweeking and testing. The production line here is nearly full of built
>
>         units waiting for the green light on the software.  We are very close...
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================