I just had to share this e-mail [RE-wrenches]

[Jeff Yago]

 I accidentally plugged the panel into a 110V line. All I'm getting now is
5.56 V (direct from the panel). I don't see any damage. The diodes also look
OK. Do you have any suggestions?


Yes,  rotate the 110 volt plug 180 degrees in the wall outlet. I think you
had it sucking and not pressurizing the module.  This setup also allows you
to avoid installing a charge controller or inverter.

Jeff Yago

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================