SPAM: Data missing from SP140 cut sheet [RE-wrenches]

[Bill Brooks]

William,

Here is the information you seek. I share your frustration. Many companies
are poor about providing basic information like this.

Model		Vmp	Imp	Voc	Isc
SP140-24P	33	4.25	42.8	4.7
SP150-24P	33	4.4	43.4	4.8

Bill.


-----Original Message-----
From: William Miller [mailto:wrmiller at slonet.org]
Sent: Wednesday, September 11, 2002 9:29 PM
To: solarinfo at si.shell.com
Cc: RE-wrenches at topica.com
Subject: SPAM: Data missing from SP140 cut sheet [RE-wrenches]


Dear Sirs or Ms:

I just downloaded the 2 page cut sheets for the Shell SP140 and SP150 PV
modules.  There is at least one item of data glaringly absent:  The rated
output current.  This was listed for all Siemens products but has
apparently been left out of the documents redone by Shell.  The documents
in question are:  ShellSolarSP140_UKv5.pdf and ShellSolarSP150_UKv5.pdf.
For an example of a correct document, please see the Siemens cut sheet for
the SP150.  It does contain the rated amperage.

I must emphasize that designers and field installers must have access to
published data in order to file complete design documents and building
permit applications.  This is an important part of manufacturers support.

Please correct the documents cited and e-mail them to me at this e-mail
address at your earliest convenience.  Thank you in advance for your
assistance.

Sincerely,


William Miller

PS:  If I may, I'd also like to suggest that these documents contain a
minimum of color for ease in printing in standard office color printers.
We need to print multiple copies of these cut sheets and it really consumes
a lot of color ink if the sheets are too busy with color.

Thanks,

WM

__________________________________________________________________
William Miller
Miller Power and Communications
PO Box 50, Santa Margarita, CA 93453
Voice :805-438-5600		Fax: 805-438-4607	VMail: 805-546-4875
email: wrmiller at slonet.org
http://millerpowerandcomm.com
License No. C-10-773985
_____________________________________________________________
Compatibility:
Word processor: WP7
Spreadsheet: Quatro Pro 7
CAD: Microstation 95, DXF, Visio 4.1T
_____________________________________________________________
"Every decent man is ashamed of the government he lives under."
                                    H. L. Mencken
__________________________________________________________________

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================