generator question [RE-wrenches]
Nick Houser
offgrid at prcn.org
Mon Aug 19 08:00:37 PDT 2002
Kurt-----Well that's very interesting. I have a Honda 5KW Diesel and it
definitely matters what position the voltage selector switch is in. I'll
have to do some testing among my customer's Hondas and see if I can verify
or disprove your techie's advice. Thanks for the heads up---this would be a
good subject for an HP article. NIck.
----- Original Message -----
From: "sunwise" <sunwise at cheqnet.net>
To: <RE-wrenches at topica.com>
Sent: Sunday, August 18, 2002 5:29 PM
Subject: RE: generator question [RE-wrenches]
> Nick Houser wrote:
>
> It IS important to avoid unbalancing the genset by
> loading one legg only when they have a splitphase output---with the
> SW4024 you need at least 6KW from the generator, a huge one if it's
> wired for 120/240 VAC, unless it has the voltage selector switch, like
> some of the Hondas.
>
> Hey Nick,
>
> I think there are even some gen-sets that have the 120/120-240 selector
> switch and still don't actually go to full output. I did a system with
> an SW and a 5KW Honda backing up 1450 watts of PV. I wasn't getting
> good charging amps and also didn't notice any difference switching the
> selector switch. The techies at Honda told me that the switch didn't
> actually give full output at 120 only. It sounded like I was talking to
> someone who should actually know and he stated I could not get over 2.5K
> output at a single 120 output regardless of switch position. Could have
> been model specific -- Kurt
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
>
>
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
More information about the RE-wrenches
mailing list