Sharp 165 modules [RE-wrenches]

[Bill Brooks]

William,

The biggest problem with a lead of any length is properly supporting them.
All too often I see the conductors laying on the roof (I know you would
never do that, but amazingly some do). With these really rediculously long
leads, the temptation to improperly support the wires is even stronger.

Bill.


-----Original Message-----
From: William Miller [mailto:wrmiller at slonet.org]
Sent: Wednesday, June 26, 2002 9:47 AM
To: RE-wrenches at topica.com
Subject: Sharp 165 modules [RE-wrenches]


Friends:

I'm finally going to do it-- bid on a job with tray cable and MC
connectors.  How long are the leads built into the Sharp 165 watt modules?
Are they long enough to connect two adjacent panels in series?  I assume
the positive consistently comes out of one side and the negative out of the
other?

Thanks,

William


__________________________________________________________________
William Miller
Miller Power and Communications
PO Box 50, Santa Margarita, CA 93453
Voice :805-438-5600		Fax: 805-438-4607	VMail: 805-546-4875
email: wrmiller at slonet.org
http://millerpowerandcomm.com
License No. C-10-773985
_____________________________________________________________
Compatibility:
Word processor: WP7
Spreadsheet: Quatro Pro 7
CAD: Microstation 95, DXF, Visio 4.1T
_____________________________________________________________
"Every decent man is ashamed of the government he lives under."
                                    H. L. Mencken
__________________________________________________________________

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================