GFI isolated neutral [RE-wrenches]

[Eric Smiley]

I have installed the neutral from a Siemens 200 Amp Heavy Duty Enclosed
Switch in a DC 175. They sell them separatately as a  neutral kit.
Probably not a stock item at your supplier, but available on order. The
block is isolated from the enclosure and I discovered that they were the
same height as the 500 amp shunt I was using. A piece of copper bus bar
fit between the two very nicely.


----------------------------------------------------------------------
Eric Smiley
Project Leader - BCIT Technology Centre
NE25-3700 Willingdon Ave. Burnaby, BC V5G 3H2
ph: (604)432-8657  esmiley at bcit.ca  www.tc.bcit.ca

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================