Dry batteries [RE-wrenches]

Allan Sindelar allan at positiveenergysolar.com
Mon Sep 3 16:50:10 PDT 2001


Four of the L16s have gone out into a home system. They tested to 65% of
rated capacity to 10.2V on a load test we tried, which isn't too bad--it may
even be partly due to the "rubber band stretching" of new cells, as these
partially dried-out cells had never been cycled. I'll let you know. We still
have 11 more L16s to play with (one showed obvious signs of failure).
Allan
----- Original Message -----
From: "Windy Dankoff, Dankoff Solar" <windy at dankoffsolar.com>
To: <RE-wrenches at topica.com>
Sent: Wednesday, June 13, 2001 2:06 PM
Subject: Re: Dry batteries [RE-wrenches]


> Allan,
>
> When batteries run dry, any portion of the plates that actually dry
> out completely are permanently inactivated. A dried out battery will
> recover only if it boiled out quickly and was refilled within a few
> weeks -- before residual moisture evaporated.
>
> Say hi to the scrap man for me.
>
> Windy
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================







More information about the RE-wrenches mailing list