Neeed big 48V charge controllers [RE-wrenches]

[Doug Pratt]

Allan Sindelar wrote:

> What would you use for a 48V (or 125VDC?) contactor capable of 100A?
> Allan @+E

Kilovac makes a dandy one. Their EV200 contactor is rated 200A continuous
at DC voltages up to 2200.  Accepts 9 to 36 VDC at the pull-in coil, and
only requires a few mA to hold once contact is made.  Contacts are sealed
in nitrogen so there's no exposed sparking.  All this for $69 each.  Us
electric vehicle folks love 'em! Here's where to buy 'em:
http://www.ciitech.com/ciitech/catalog/catalog.asp?ptype_id=4006

Cheers,
Doug Pratt

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================