Frigidare Washer [RE-wrenches]

[Jack West, Talkeetna AE]

GFI's are not required for washers. I find that they can nuisance trip a
lot even on grid power when used on washer circuits.  Use a good quality
20 amp receptacle on a dedicated circuit.

Jack West

Gary wrote:

> >  But I will also caution folks to watch out for poor quality GFIC plugs
> > that these washers plug into. We had a washer that wouldn't cycle and
> > swaped controllers in the washer and only when removing the washer and
> > trying it w/ a cord that had the grounding pin cut off ( replace it
> > tommorrow) did it work. Shi_ luck, but a valuable lesson.
> 
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================