olar Boost / C40 test [RE-wrenches]

Doug Pratt dpratt at pacific.net
Fri May 4 19:23:09 PDT 2001


Excellent work Tump.  It's nice to see when common sense expectations and real
world experience coincide.  4-5% gain is no big deal, but I see that your ambiant
temperture was over 90 degrees, so this was far from ideal conditions for the Solar
Boost.
  This settles it, I'm going to start recommending the Solar Boost controllers with
any sizeable battery-based intertie systems (including my own new shop this
summer).
-Doug Pratt


blair Tumpmay wrote:

>   OK you folks heres the raw data, sorry travis that spread sheet stuff
> would have taken me till next week!
>
> All measurments were taken w/ a Fluke 87, Fluke clamp on AC 80i 400 / DC
> 80i1010 amp probes.Watts w/ a Brand Electronics transducer at AC L1to the
> grid.  DC measured at the Batt cable in DC disconnect box to inverter.Temp
> was a fluke thermocoupler K type surface probe.
>
> Site; N44*   W 069*    temp amb; 92.2* panel top temp;117* back of panel
> 124.2* array ang;44* facing;185* M Elv;170'
>   System SW 4024 * 375 surrette batts.15 585 panels & 1 590 panel wired 24vt DC
>
> C40'    Battery voltage;25.46  panel voltage 26.32 DC amps in 39.5-40  AC
> amps to grid 7.62  Brand WT Mtr  930 Avg
>
> Solar Boost 50; Batt.Vt.25.46 Panel Vt.28.5 DC Amps in 40.9-41.2  AC Amps
> into grid 8.1 Brand WT Mtr; 970 Avg
>
> REMEMBER REMOVE THE BONDING SCREW IN DC DOX IF APPLICKABLE ALSO USE DELTA
> LIGHTNING ARRESTORS SOLAR BOOST MUST NOT BE GROUNDED BEFORE CHARGE CONTROLLER.
>
> Solarwinds NorthernLights
> Serving Mid Coast Maine & Northern California
>           610-517-8401              707-498-2804
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com

T O P I C A  -- Learn More. Surf Less.
Newsletters, Tips and Discussions on Topics You Choose.
http://www.topica.com/partner/tag01
==^================================================================




More information about the RE-wrenches mailing list