Kohler 25/30 kw 3 phase [RE-wrenches]

[Bob Ellison, Alternative Energy Systems]

If you put meters on the output of most any generator you will find that the
load varies, it does not have to be perfect. Also I think you need to start
by matching the input to the charger, not the output of the inverters
charger.

On my generator, the load varies from 23 amps on each leg (when we are
really working the chargers) to as low as 6 amps or less on the 2nd leg,
depending on where in the charging cycle you are. This is using 2 identical
inverters it just varies depending on where in the charging cycle you are.

Later,
Bob




RE. Ellison
Supplier of;
Diesel Generators &
Alternative Energy Systems & Supplies
34642 Countryman Road
Theresa, NY. USA
                              13691-2076



-----Original Message-----
From:	Drake Chamberlin - Electrical Energy [mailto:solar at eagle-access.net]
Sent:	Wednesday, April 18, 2001 9:43 AM
To:	RE-wrenches at topica.com
Subject:	Re: Kohler 25/30 kw 3 phase [RE-wrenches]

Hi Wrenches,

Trace says that it is ok to run stacked SW 4024 inverters off two legs of a
120/208 three phase generator.

We have had no luck, however, finding a battery charger that has an output
close to the Trace SW series inverters.  We need this charger to balance
the third phase of the generator.

Does anyone know of a source for large 24 volt battery chargers that would
charge in a similar pattern to the Trace?

Thanks,

Drake

- - -
To send a message:
 RE-wrenches at topica.com

Archive of previous messages:
 http://www.topica.com/lists/RE-wrenches/

List rules & etiquette:
 http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator:
 michael.welch at homepower.com



- - -
To send a message:
 RE-wrenches at topica.com

Archive of previous messages: 
 http://www.topica.com/lists/RE-wrenches/

List rules & etiquette:
 http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator:
 michael.welch at homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com

T O P I C A  -- Learn More. Surf Less.
Newsletters, Tips and Discussions on Topics You Choose.
http://www.topica.com/partner/tag01
==^================================================================