Plea for "Edge-O-Cation" [RE-wrenches]

Clive Wilkins, PowerSense powersense at horizon.co.fk
Fri Mar 30 05:40:57 PST 2001


further to my last message below, and I am thinking aloud here, sulphation
of the battery would give you high cell voltage as soon as you started
charging.  if you aren't getting a high voltage and the current is going
down to 1 amp within an hour, maybe the control of the charger is being
tricked into seeing a higher voltage than actually exists.  Have you checked
the cell voltages?  also have you tried charging with a smaller charger ie a
trickle charger - if this charges then the control for the charger side of
the inverter is possibly at fault.  When you come to think of it, an
equalisation charge is the same as a trickle charge ie constant voltage,
constant amps.

cheers

clive

Clive Wilkinson
PowerSense
Dunnose Head Farm
Falkland Islands

tel +500 42202
fax +500 42203

powersense at horizon.co.fk
http://www.falklandwool.com/power



>
> might sound daft, but have you checked out the generator voltage and
> frequency?  Have seen similar situations and in those cases the genset was
> at fault, not the batteries
>



- - - - - - -
To send a message:
 RE-wrenches at topica.com

The archive of previous messages: 
 http://www.topica.com/lists/RE-wrenches/

List rules & etiquette:
 http://www.mrsharkey.com/wrenches/etiquete.htm

To unsubscribe send a message to: 
 RE-wrenches-unsubscribe at topica.com

To check out the other RE-Wrench participants:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine: 
 www.homepower.com

For info contact list moderator by email:
 michael.welch at homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com

T O P I C A  -- Learn More. Surf Less.
Newsletters, Tips and Discussions on Topics You Choose.
http://www.topica.com/partner/tag01
==^================================================================




More information about the RE-wrenches mailing list