net metered system question [RE-wrenches]

[hugh piggott]

<x-flowed>At 10:40 am -0800 2/3/01, David Palumbo, Independent Power & Light wrote:

>
>	The system has been programmed as follows:
>Trace bulk charge voltage 58.6, Abortion time 2 hours,
>Float Voltage 54.0 (I don't want to set this any higher because the battery
>box vent fans would stay on all the time as they are set to come on at
54.4v).

You cold easily adjust this (if it helps) by fitting a couple of 
diodes in the supply to the fan control sensor circuit.  That would 
tweak the set point up by a volt or two.
-- 
Hugh

At Wales for a weekend at CAT
http://www.scoraigwind.co.uk

- - - - - - -
To send a message:
 RE-wrenches at topica.com

The archive of previous messages: 
 http://www.topica.com/lists/RE-wrenches/

List rules & etiquette:
 http://www.mrsharkey.com/wrenches/etiquete.htm

To unsubscribe send a message to: 
 RE-wrenches-unsubscribe at topica.com

To check out the other RE-Wrench participants:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine: 
 www.homepower.com

For info contact list moderator by email:
 michael.welch at homepower.com

____________________________________________________________
T O P I C A  -- Learn More. Surf Less. 
Newsletters, Tips and Discussions on Topics You Choose.
http://www.topica.com/partner/tag01

</x-flowed>