Zomeworks problems [RE-wrenches]

[Kirk Herander]

Rant on.

I just finished installing a Zomeworks UTR for -8- AP 120 watt panels.
The usual frustrations presented themselves: missing hardware, wrong
size hardware, documentation not up to date, ect. BTW, I have never
assembled a rack kit, regardless of OEM, that either had some missing or
wrong size nuts and bolts.

And please, can someone tell me why the rapid response plates (four
pieces of flimsy sheet metal) for the above-mentioned rack, now have a
list cost of $350, up from $125 in 1999????? They're not made of gold,
after all. Zomeworks rep, where art thou? Rant off.

Kirk 


"Lee Tavenner, Solar Plexus" wrote:
> 
> Watch out for the washers too. The grade 8 yellow washers that come in
> the package are supposed to be 1 inch inside diameter and we got 15/16
> and had to file them out on the job-site to make them work.  The rails
> also had to be rotated 180 degrees from what the directions said when
> you change the orientation from landscape to portrait.  If you don't
> rotate the rails the j-clips won't hold the panel.   Lee Tavenner at
> Solar Plexus
> 
> - - - -
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================