Carflex revisited [RE-wrenches]
Drake Chamberlin - Electrical Energy
solar at eagle-access.net
Fri May 25 10:27:32 PDT 2001
<x-flowed>
Bill and Wrenches,
The physics of evaporative cooling are well known. If a conduit is full of
water, and conditions are hot enough to raise the temperature to 60
degrees C, the water will evaporate quickly. This evaporation will cool the
conduit. When there is no more water in the conduit to cool it, it will be
dry, by definition.
60 degrees C is 140 degrees F. Try to get into a hot tub at 115
degrees. It will turn your skin bright red. A 140 degree conduit would be
quite hot to the touch.
To say conduit needs an 80 degree C rating stretches the credibility a bit
far. That is 176 degrees F, hot enough to boil water at high
altitudes. Getting these temperatures would require the use of
concentrators.
Conduits for solar modules are either shaded by the array, or in the
sun. Solar modules are passively heated by the sun, and do not actively
generate heat like a compressor.
If conduits for arrays do get over their rated temperatures, so do conduits
for air conditioning units and other compressors. PV needs to be on a
level playing field with other types of wiring.
Drake
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
</x-flowed>
More information about the RE-wrenches
mailing list