36 VDC Charge Controllers? [RE-wrenches]
Kirk Herander, VT Solar
vtsolar1 at together.net
Wed May 16 06:28:20 PDT 2001
Ray,
BZ Products makes one. It's good for 16 amps @48 vdc. No MPPT though,
just single stage (float voltage only) PWM. Model # is ICC 1636. It's
not very expensive, dealer cost roughly $75. It needs to be mounted in a
box.
Kirk
Ray Walters wrote:
>
> Hi Gang:
>
> Any ideas for charge controllers for a 36 vdc system? Any MPPT
> possibilities? I was considering charging part of the string with a 24 v
> controller and the other with a 12 v, out of desperation. The seperate
> controller idea has one merit: 12 v taps for lights,winch, etc. wouldn't
> unbalance the system as bad, since those batteries could be recharged
> seperately. This is for a offroad EV by the way.
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com
T O P I C A -- Learn More. Surf Less.
Newsletters, Tips and Discussions on Topics You Choose.
http://www.topica.com/partner/tag01
==^================================================================
More information about the RE-wrenches
mailing list