Gray Flex [RE-wrenches]

[jay peltz]

Hi Bob-O,

Its amazing to see such lack of real data and  a lack of common sense being
applied to real world situations.

60C and WET  isn't going to be found in nature, maybe in an industrial situation
though. ( OK so you guys doing work around volcanos better get the hi temp
stuff).

And what about the flex on a black flat roof in So Cal ( where you can really fry
and egg), I'd say thats just a bit above the 56C you measured.

And so what happens??  Does this product melt when it gets wet?  What is the
concern here with the wet?  You are using ( right!) wet rated wire inside the
conduit??


When I cornered John Wiles on this and I pushed him hard, he responded with well
the flex will pull out of the fittings at high temps so we can't use it.

So lets put a sticker that says " NOT A HAND HOLD"  that ought to take care of
it!!

common sense rules!!

jay

peltz power



- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com

T O P I C A  -- Learn More. Surf Less.
Newsletters, Tips and Discussions on Topics You Choose.
http://www.topica.com/partner/tag01
==^================================================================