Hoppecke fiber nicads [RE-wrenches]

[Jeffrey Wolfe, Global Resources]

Hi all,

Well, so far we've avoided them, but it looks like we *may* get into a 
system design using some Hoppecke Fiber nicads. (20 cells FNC 306 L). While 
I've asked the manufacturer for info and application recommendations, what 
is everyone's experience with using these with Trace SW and RV Power 
Products equipment? Everything I've seen connected to these (and it's 
admittedly not much) is working poorly because the charge controller does 
not charge the batteries high enough, and the inverter shuts down on over 
voltage when the batteries get close to a correct voltage.

Are there easy and good solutions for these? Does anyone have long-term 
systems out there with these that they are happy with?

Thanks,

Jeff

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================