Fw: IOTA Chargers vs. Todd Chargers [RE-wrenches]

[Allan Sindelar, Positive Energy, Inc.]

Wrenches,
Colin got this info from Iota on their chargers. Forwarding for everyone's
benefit.
Allan @+E

Subject: Re: IOTA Chargers vs. Todd Chargers



> Here's some info on IOTA chargers... FYI:
> Basically IOTA said that their chargers operate very similarly to the Todd
> chargers, except that they work... but actually there were some
differences
> that were flushed out in our conversation.
>
> 1)  No problem pairing chargers both in Parallel and Series.
>
> 2) IOTA can do custom set points with an approx. (.6-.8 volt range)... You
> set a high or low voltage and then the range is predetermined... For
example
> if you set a low point of 14.2 V then the high point is 14.2 V + .8 V =
15.0
> V.  If you set a high voltage point of 15.2 V then the low voltage point
is
> approx. (.6-.8 V) less, or 14.2 -14.4 V.
>
> 3)  These chargers operate on a constant current algorithm.
>
> 4)  The IOTA charges actually operate at 100% of their rated output... a
75
> Amp charger will put out 75 amps (so they say)...
>
> Colin

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================