Sewer Pump 1/2HP 120vac / DR2424 [RE-wrenches]

[cvsolar at aol.com]

Has anyone had experience using a DR2424 to run a 1/2 hp 120vac sewer pump.  
All my pump experience is either DC pumps or ac pumps using the SW4024 or 
4048.  I have only installed one DR2424 so far and it is only running a 
freezer and furnace.  This pump will be pumping up to a mound system.  The 
inverter will be dedicated to this one purpose so their are no other load 
issues. 

John Blittersdorf
Central Vermont Solar and Wind
- - - - - - -
To send a message to the list use: <RE-wrenches at topica.com>

To view an archive of previous messages go to: <http://www.topica.com/lists/RE-wrenches/

To unsubscribe send an email message to: <RE-wrenches-unsubscribe at topica.com>

To check out who the other RE-Wrench participants are, go to <http://www.mrsharkey.com/wrenches/>

Hosted by Home Power magazine: <http://www.homepower.com>

for info contact: <michael.welch at homepower.com>
________________________________________________________________________
Start an Email List For Free at Topica.  http://www.topica.com/register