Trace SW4024 SLT mode [RE-wrenches]
Kurt Nelson
sunwise at win.bright.net
Wed Dec 29 07:02:48 PST 1999
Greetings John,
Don't know why you'd want to use the silent mode without a generator
component. Regarding the flickering lights, probably the search watts set
too high. Factory default at 60, I usually drop it down to 16 (minimium). KGN
At 07:16 PM 12/26/99 -0800, you wrote:
>Does anyone have experience using the SW4024 SLT (silent) mode on a grid
>connected backup power system without renewable inputs? Does it reduce power
>consumption? Is there any particular reasons to use it or not to use it?..
>Also I just had a customer call with a peculiar problem with his SW4024. It
>is a brand new system - grid connected backup power with 12 Trojan L16's.
>The circuit breaker from the grid kicked (I had the grid amps set too high),
>the house ran the batteries down to about 40% and during this time he
>reported intermittant flickering of his lights, not related to any big loads.
> Has anyone seen this?
> Today my "Y2K Lady" really panicked when her cable TV line failed and the
>grid quit at the same time. She thought something was wrong the the system I
>had installed and I was confused when the E-meter amps reading was -1 while
>supposedly the grid had failed. After driving 45 minutes to troubleshoot,
>she told me everything was working normally. It turned out that only one
>side of the grid had failed and the side to which I connected the inverter
>was ok while the other side feeding some of her main grid loads was off.
>Lesson learned: I need to have a chart of her circuits in her file so I could
>quickly determine if a one sided grid failure had happened by simply asking
>her what was working and what was not! One other question, has anyone had a
>problem with the furling cable on a Bergey 1500 sticking and holding the tail
>in furled position?
>Hope everyone is enjoying the holidays.
>
>John Blittersdorf
>Central Vermont Solar and Wind
>200 West Road
>North Chittenden, VT 05763
>cvsolar at aol.com
>
>
>- - - - - - -
>To send a message to the list use: <RE-wrenches at topica.com>
>
>To view an archive of previous messages go to:
<http://www.topica.com/lists/RE-wrenches/
>
>To unsubscribe send an email message to: <RE-wrenches-unsubscribe at topica.com>
>
>Hosted by Home Power magazine: <http://www.homepower.com>
>
>for info contact: <michael.welch at homepower.com>
>
>_____________________________________________________________
>Get your favorite topic delivered daily.
>http://www.topica.com/t/11
>
>
- - - - - - -
To send a message to the list use: <RE-wrenches at topica.com>
To view an archive of previous messages go to: <http://www.topica.com/lists/RE-wrenches/
To unsubscribe send an email message to: <RE-wrenches-unsubscribe at topica.com>
Hosted by Home Power magazine: <http://www.homepower.com>
for info contact: <michael.welch at homepower.com>
_____________________________________________________________
Get your favorite topic delivered daily.
http://www.topica.com/t/11
More information about the RE-wrenches
mailing list