KWH meter discrepancy [RE-wrenches]
David Katz
david at aeesolar.com
Mon May 22 10:11:01 PDT 2006
<x-flowed>
I have seen quite a bit of discrepancy in the meters on grid-tie
inverters. We are running a test of 4 inverters on identical arrays on
the Arcata, CA city hall. Roger, a contractor in Arcata sold and
installed the systems and it is being monitored by a Fat Spaniel
system. You can see the results real time at -
http://view2.fatspaniel.net/FST/Portal/AEE/kiosk/index.html
We are seeing the displays on the SMA and Xantrex inverters in the test
reading within 2% of the Fat Spaniel monitor. The Fronius and the
PVPowered displays are reading 7-10% higher than actual output on the
monitoring system.
Please not that the PVPowered output in the cumulative total on the web
site is low because the inverter failed and was off for a week while we
waited for replacement. The actual PVPowered output is only about 5%
lower than the other inverters in the test. Unfortunately we do not have
utility grade meters on each inverter to compare their outputs.
David Katz
David Katz
AEE Solar, Inc.
formerly Alternative Energy Engineering
1155 Redway Drive - Box 339
Redway, CA 95560 USA
Phone 707-825-1200
Fax 707-825-1202
email david at aeesolar.com
www.aeesolar.com
>
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list